Blanchard 1300

Discussion in 'Blanchard & Barnard' started by Kawpan, May 7, 2020.

  1. Kawpan Thailand

    Offline
    Joined:
    Feb 26, 2019
    Messages:
    67
    Location:
    Sai-yok
  2. Mackburner

    Mackburner United Kingdom Founder Member Subscriber

    Offline
    Joined:
    Sep 10, 2010
    Messages:
    6,457
    Location:
    Hertfordshire
    Nice to see one working. These are getting hard to find and when you do they are expensive. Look for a serial number on the Hex nut of the tank connector and for a date and cp stamped on the burner case rim. Model 1300 should be 350cp. ::Neil::
     
  3. Anthony

    Anthony Australia Subscriber

    Offline
    Joined:
    May 7, 2013
    Messages:
    1,348
    Location:
    Melbourne, Australia
    Very nice.
    The top hood is sitting strangely low.
    It would need ventilation there. :-k
     
  4. JEFF JOHNSON

    JEFF JOHNSON United Kingdom Subscriber

    Offline
    Joined:
    Nov 28, 2010
    Messages:
    11,901
    Location:
    Shetland Islands UK..
    A splendid old lamp!:thumbup::thumbup:
     
  5. Tony Press

    Tony Press Australia Subscriber

    Offline
    Joined:
    Aug 28, 2012
    Messages:
    7,534
    Location:
    Stinkpot Bay, Howden, Tasmania, Australia
    That’s a very fine lamp, @Kawpan.

    Tony
     
  6. James K

    James K United Kingdom Subscriber

    Offline
    Joined:
    Nov 10, 2017
    Messages:
    420
    That is a beautiful lamp, I hope it's one of your favourites. Nice to see it complete and running as well.
    With those long arms it looks like it is the export 'tropical version.
     
  7. Mackburner

    Mackburner United Kingdom Founder Member Subscriber

    Offline
    Joined:
    Sep 10, 2010
    Messages:
    6,457
    Location:
    Hertfordshire
    Yes they do reduce the aspiration and in fact a lot of these lamps turn up with that top hood missing. The London market traders normally discarded the hood because they reckoned it cut the light power by a half. ::Neil::
     
  8. Kawpan Thailand

    Offline
    Joined:
    Feb 26, 2019
    Messages:
    67
    Location:
    Sai-yok
    @Anthony
    Yes correct the hood it was modify a little bit. So, when I light on lamp will move them out. but the original one on another model when put the hood. lighting will be down or same like Neil say, I think, this is one reason when we found the lamp we will loss this parts. someone making the leaf reflective plate in addition and some model they have it.:)

    IMG_5078.jpg



    @Mackburner
    Here is number on the Hex nut but the cp on burner I saw them but not easy to take photo because need remove some parts. :)

    IMG_5063.jpg
     

Share This Page