Radiant star pump assembly

Discussion in 'Fettling Forum' started by Darryl Durdin, Nov 14, 2019.

  1. Darryl Durdin

    Darryl Durdin Australia Subscriber

    Offline
    Joined:
    Dec 11, 2018
    Messages:
    341
    Location:
    Whyalla. South Australia. Australia
    Hi there fellas, not wanting to damage anything,
    Dose the filler cap unscrew from the pump tube.
    I want to change the seal, plan B Should i burn it out? As always open to ideas 20191115_095544.jpg
     
  2. Tony Press

    Tony Press Australia Subscriber

    Online
    Joined:
    Aug 28, 2012
    Messages:
    4,845
    Location:
    Stinkpot Bay, Howden, Tasmania, Australia
    Darryl

    The circular locking ring on the pump is fixed (soldered) to the pump tube.

    Be careful, if you’re burning out the old washer, to not de-solder it.

    Tony

    @Darryl Durdin
     
  3. Darryl Durdin

    Darryl Durdin Australia Subscriber

    Offline
    Joined:
    Dec 11, 2018
    Messages:
    341
    Location:
    Whyalla. South Australia. Australia
    Thank you for the help, ive decided to just fit a new o-ring, over the original, seems to do the job.
     

Share This Page