Tilley KL 80 arrived today!

Discussion in 'Pressure Lamp Discussion Forum' started by Neighbor Al, Dec 9, 2011.

  1. Neighbor Al

    Neighbor Al Denmark Subscriber

    Offline
    Joined:
    Nov 21, 2011
    Messages:
    1,062
    Location:
    Russell, PA United States
    I found this on craigslist from a gentleman in Colorado. It looks to be in good conditions and only needing a top shade and smoke bell to be complete. No time to fettle right now, so I've hung it from the mantle over the fireplace in lieu of a stocking!

    https://www.facebook.com/media/set/?set=a.2479741827846.2127341.1081556789&type=1&l=8e415f7173
     
  2. CornishBurner86

    Offline
    Joined:
    Nov 21, 2011
    Messages:
    117
    Wow thats another great Tilley!

    You getting a collection of them now,

    Adam
     
  3. Neighbor Al

    Neighbor Al Denmark Subscriber

    Offline
    Joined:
    Nov 21, 2011
    Messages:
    1,062
    Location:
    Russell, PA United States
    It was too good to pass up. I have to back off for a while until I get my finances back on an even keel. My next expense will be to have the tinsmith make me a shade and a smoke bell for it. All of the common smoke bells over here are an inch too small!
     
  4. CornishBurner86

    Offline
    Joined:
    Nov 21, 2011
    Messages:
    117
    Yeah i know what you mean on the old finances,

    I shouldnt of bought the Tilley 246A but it looked too good,

    Im looking for a table lamp next.....

    I hope you get the parts made up ok?

    Adam
     
  5. Neighbor Al

    Neighbor Al Denmark Subscriber

    Offline
    Joined:
    Nov 21, 2011
    Messages:
    1,062
    Location:
    Russell, PA United States
    Thanks! I'm going to scout out the local big-box store for something for the smoke bell. I'm thinking that I can convert a Butterfly shade to fit easily, and they are very affordable.

    Good luck on the table lamp! I'd make you a killer deal if you lived closer...

    A
     
  6. Neighbor Al

    Neighbor Al Denmark Subscriber

    Offline
    Joined:
    Nov 21, 2011
    Messages:
    1,062
    Location:
    Russell, PA United States
    I put a little oil in the pump and tweeked the NRV spring, and now it's holding pressure and the vaporizer seems to be breathing just fine.

    So cool! :mrgreen:
     
  7. JEFF JOHNSON

    JEFF JOHNSON United Kingdom Subscriber

    Offline
    Joined:
    Nov 28, 2010
    Messages:
    16,871
    Location:
    Shetland Islands UK..
    Hello AL, it's in good nick! :thumbup:

    Sometimes those Tilley lamps are dated, my example has 161 stamped on it, which is January 1961.

    The numbers are hidden by the ring which the lamp sits in.

    It will make an interesting video, once you have made the reflector and heat deflector for it, Jeff.
     
  8. X246A

    X246A United Kingdom Subscriber

    Offline
    Joined:
    Jan 11, 2011
    Messages:
    1,240
    Location:
    Norfolk, England
    Hi Al

    Very nice lamp, especially in place of a Christmas stockng. Why not leave the polystyrene balls on it to look like snow!

    Well done, Nice find.

    Regards, Jeremy
     
  9. Neighbor Al

    Neighbor Al Denmark Subscriber

    Offline
    Joined:
    Nov 21, 2011
    Messages:
    1,062
    Location:
    Russell, PA United States
    161 also! I was tidying up and stopped to take a peek. Small world, eh?
     
    Last edited by a moderator: Mar 31, 2017
  10. JEFF JOHNSON

    JEFF JOHNSON United Kingdom Subscriber

    Offline
    Joined:
    Nov 28, 2010
    Messages:
    16,871
    Location:
    Shetland Islands UK..
    Hello AL, yes, it it is, I had another one of those tanks and it was stamped for 1962 or 3, I don't recall which month, another collector has it now, Jeff.
     
  11. Neighbor Al

    Neighbor Al Denmark Subscriber

    Offline
    Joined:
    Nov 21, 2011
    Messages:
    1,062
    Location:
    Russell, PA United States
    Polished all of the lacquer off the top of the fount, so it's looking better now. Put some kerosene in and started to pump. Uh oh, the NRV started leaking, and then the valve started leaking at the fount. Ordered a SP1 service kit just to give it a fresh start in a new home. (Ordered the Tilley book too since I was paying for the postage.) Grateful not to have to pay the VAT that most of you endure.
     
  12. Dan D

    Dan D Subscriber

    Offline
    Joined:
    Feb 13, 2011
    Messages:
    374
    Location:
    USA
    Hi Al,

    You'll love the Tilley book. And if you do, Ian's Vapalux and Bialaddin book is a treat also.

    I hope you are aware of the different washers that come in the different washer/service kits. A new Tilley SP1 service kit may not have the proper washers for an older pump and cock. Just a heads up.

    Dan
     
  13. David Shouksmith

    David Shouksmith India Founder Member

    Offline
    Joined:
    Sep 6, 2010
    Messages:
    8,416
    Location:
    North-East England
    Yes, Dan's correct - I made a similar response in ...
     

Share This Page