Aladdin 1A restoration I’m call SCAR

Discussion in 'Fettling Forum' started by Darryl Durdin, Nov 5, 2021.

  1. Darryl Durdin

    Darryl Durdin Australia Subscriber

    Offline
    Joined:
    Dec 11, 2018
    Messages:
    1,652
    Location:
    Whyalla. South Australia. Australia
    Hi fellas, I have finished my 1A Aladdin restoration, I have named my lantern
    SCAR, it’s been very educational I’ve had frustrations, success, fun, worked on my fettling skills,
    6DED61CC-1F87-4AB4-B186-EF7616673760.jpeg 6C9CC364-205F-4EC0-B9B9-6C653BC8CE6A.jpeg
    It’s an all steel lantern , I probably have the part to just replace but there was no satisfaction in that, dated maybe 1942? War time,
    You can follow my threads about my project, I don’t know how to link them to this post,
    NRV that would not budge,
    Aladdin hood repair,
    This part is a follow on,
    The cage was very rusted and weak and wobbly, I silver soldered the stems in place , blasted it clean, painted with VHT silver paint, it looks a treat and I think I did it some justice, 33AC7507-BB00-4D76-82F8-A17AD18B680E.jpeg


    The pricker wheel arrangement I totally dissembled cleaned up and repacked the gland nut with graphite tape, even the wheel got a make over. 64ED0562-1F84-4656-9961-39F3EB99DDDC.jpeg

    The vaporiser I cleaned inside with the wire from a bicycle break wire and out side, the bottom flange and nut with dremmel wire brush, FFC26395-36EA-4C7E-B989-2A8CA6BE4A0D.jpeg

    the jet and needle I replaced with a radius 119 reproduction from Taiwan eBay special, the tooling for this must be seen to believe, I re taped the jet with a M5x.8 tap, it fits the jet perfect.

    there is some adjusting the needle length

    I have put an Aladdin made in Australia globe I had. 36AF652C-40CB-4315-87C7-4C028C47C4D3.jpeg

    ive put it together, burning in the mantle,
    I had a minor issue with the vaporiser seating in the fuel pick up but I have sorted that, I have a pin hole in the tank that I missed when pressure tested in the water, I’ll be able th fix it. 2633D0A7-44E5-4851-84C8-080E731FB426.jpeg

    it is now running like clock work, big butterfly mantle long preheat and away scar goes,
    You can see over my project a lot of it dose not look pretty or shine, but shows some scars a long life maybe a hard life who knows, but I’m very happy with the outcome
    And now a money shot,
    3B68D4CD-8205-42BC-8FB0-607DC134F92E.jpeg
    Japanese probverb,
    Even the ugliest creature have beauty
    Thanks fellas I hope you all like my project, and it gives hope to others who may want to fettle their own project lanterns
     

    Attached Files:

  2. Tive

    Tive Sweden Subscriber

    Offline
    Joined:
    Jan 1, 2011
    Messages:
    455
    Location:
    Sweden
    How nice !
    The satisfaction from restoring an old dog like that, and to finally to see it doing it's intended job from so long ago, is nothing less than fantastic ! very nicely fettled !!:clap::clap:
     
  3. ROBBO55

    ROBBO55 Subscriber

    Offline
    Joined:
    Oct 21, 2014
    Messages:
    4,434
    Location:
    Somersby, New South Wales, Australia
    Well done Darryl. IMO If you can, it's far more satisfying to rebuild a part than just replace it. :thumbup::thumbup::thumbup:
     
  4. Darryl Durdin

    Darryl Durdin Australia Subscriber

    Offline
    Joined:
    Dec 11, 2018
    Messages:
    1,652
    Location:
    Whyalla. South Australia. Australia
    Hi fellas here’s SCAR in action , very bright, very cool
     

    Attached Files:

  5. Jacques Van Der Rijst South Africa

    Offline
    Joined:
    Mar 2, 2020
    Messages:
    60
    Location:
    Pretoria, South Africa
    Nicely done Darryl - that is a keeper/user - always very satisfying to look back at a fettle like this especially when using it on a regular basis. Let the light shine...
     

Share This Page