What do I have here? Tilley TL 120?

Bought this one minus the pump and not quite sure what I have .The seller sold this one , a TL 106 and the gallery all separately so I am not sure which lamp the gallery belonged to.

 

That is a TL-120-A and the gallery is for an older Tilley table lamp, the stem unscrews from the tank.

 

I think you'll find that's the correct gallery for that lamp

 

The TL-120-A came with a steel gallery and the link below shows a complete example.

TL 120A Sept. 1972

 

Thank you for the replies.

 

The gallery was missing two of the globe holding screws. Here's the process I used to make them. I will make another one so they will all look the same.

 

Well fettled.

 

Tested it with a working gallery and the vapourizer is good .

 

It's progressing.
The stem is made from plated brass so it cleans up well.

 

Nice work on the gallery screws

 

It's working with its own gallery now. Unfortunately I heard the dreaded ping while preheating when the repro globe cracked.
At least it is working well.

 

Nice job mate, shame about your globe, maybe to much pressure on the gallery screws?
I believe this might cause the globe to crack, just a thought?
I still use cracked globe's until they fall apart.

 

Good skills set you have. I like to see creative practical thinking. Thank you for sharing