Handi lantern - Chrome or nickel plated hood

Discussion in 'Handi' started by Marko57, Feb 5, 2025.

  1. Marko57

    Marko57 Australia Subscriber

    Offline
    Joined:
    Jul 30, 2022
    Messages:
    204
    Location:
    Brisbane Australia
  2. Nils Stephenson

    Nils Stephenson Founder Member

    Offline
    Joined:
    Sep 9, 2010
    Messages:
    3,405
    Location:
    Copenhagen, Denmark
    Do you know if this hood is original to this lantern? I have a similar hood, but it came as just the hood. I can probably find a similar vintage lantern to put it on.

    I would say it is nickel plated. Just doesn't 'feel' like chrome.
     
  3. Marko57

    Marko57 Australia Subscriber

    Offline
    Joined:
    Jul 30, 2022
    Messages:
    204
    Location:
    Brisbane Australia
    @Nils Stephenson

    Hello Nils
    It is as I found it many years ago, I will go with you being nickel plated.
    Is your one just as rusty ?????
    The green tank one with rusty hood I posted was the first one I found and I was in the dark what the original finish was
    untill I found this one with some of the plating still left on it.
    Should I get them both replated ?????
    Cheers Mark.
     
  4. Nils Stephenson

    Nils Stephenson Founder Member

    Offline
    Joined:
    Sep 9, 2010
    Messages:
    3,405
    Location:
    Copenhagen, Denmark
    Unfortunately all my Australian lamps are back home in Oz, so I can't check things out. From memory it is slightly better but still quite rusty.

    In my list of lamps I have an older KeroPet with a nickel hood (I'm assuming what you would call a type 2) that is similar to your green tank one. Unfortunately I havn't taken a photo of it so can't remember much about it but I'm sure it is just as rust as yours.

    If the rust pitting is not too bad then it can be ok to get them re-plated. At least it protects them a bit.
     

Share This Page