Tony, This is not a standard size. A glass-maker will be able to widen a 100mm diameter tube or to reduce a 105mm tube. Length will be no problem. It may require some phone calls to find a glass maker who wants to do the job. Some universities will have their own glass making department for their laboratories. That is where I would ask first. I certainly could give you the company details where I have done customized glassware, but that is in Germany. Last job was a number of spare globes for my baking oven lamp. Erik
If you can use a 105 mm dia. tube it will be easier. These are readily available for glass-makers and can be cut to your needed length. Erik
@Erik Leger 105mm diameter is ok for only one of the lanterns. Realistically I will need the 102 or 103mm diameter. These are to fit Australian-made Gloria 100s and similar Gloria lanterns. If I found a source, there would be the potential to order quite a few. Thanks for you advice. Tony
just checked my gloria lanterns . Gloria 379 glass is 114 long and 97 ID 102 OD marked pyrex made in england . Gloria 100 The same glass fits this model as well .The glass for this model could go to 130mm long Gloria W same model as Bo Rymans Glass fits this model as well its a snug fit could have a bigger 99 ID. Bob .
@Lamp_Doctor Bob, the glasses I have are interchangeable between the models; and could be longer on some models, but I suspect that Gloria just used the same glass for different models. What do you think? Cheers Tony
yes most likely used the same glass. I got my special order glass for another lantern from Sands Bob .
@Tony Press , I have two pieces of unmarked pyrex with 97mm ID and 102mm OD, one 182mm long and the other, 195 long. If you do not come right locally, you can have them for the cost of the postage. I knew they would be useful someday...
This sounds like the same diameter as used on Handis. They have a diameter of roughly 100mm. The height is 'only' 110mm though. If they fit, that might enlarge the order making it more worthwhile. Just a thought.
I don’t have a Handi, but I’ll ask a couple of other people to check. There are a couple of Gloria 33s with Handi style glasses in the Reference Gallery. Cheers Tony
The large straight sided coleman globe fits the Gloria 33. Also the large bulge coleman globe fits to . Just had my gloria 33 lit last night lot of cleaning up now . Just checked glasses etc Handi . Fits 2 of my models but doesnt fit nice ely on the gloria 100 doesnt slide up high enough inside hood to light lantern Bob .
G'day Tony, The repo from Sands might work? But they are narrower one end than the other. Handi Kero- Pet Reproduction Glass
@Tony Press Just remembered the glass sold by Sands is marked Handi / Gloria. But not sure which one?
@ColinG I'll get the calipers out when I get home, but I think the ID will be too small to fit over the burner casting [ @Lamp_Doctor ]. Cheers Tony
Tony I meant to say to you and if any out there could check the Vaporlux globe may work I have a Handi on my 100 but it’s too short and doesn’t look right
