Yes, this is the first variation of the 930 350CP and the spirit cup is correct for this variation. As has been mentioned in another thread, the...
That certainly looks like a 350CP collar, base plate and spirit cup from the first variation. What does it say on the tank? That is not the right...
The large wheel has a washer with two flat sides moulded into the plastic. That way it sits tight (ish) on the shaft without the need for a...
I try to make all seals myself (it is the most satisfying) but as Tony says, make sure you have the right materials.
It is from a Svea stove.
And 115, 116 and 120. ;) Sorry, couldn't help it. :)
The fuel pickup is soldered into the tank and I would not recommend trying to remove it. With the vapouriser and the cleaning pinion removed, it...
This shows all the symptoms of too much fuel or not enough air. Here are some questions to get more information. 1. You say you have changed the...
Martin has given some good advice. The gap looks right as I always adjust these to the maximum gap they can be. These model lanterns, whether from...
The different angle of the pump could be as simple as the pump tube being knocked in a bit. There was no real difference in the design of the tank...
A nice selection of Handis you have there. The brass one is the oldest and probably from the early 50s. The other two are from the 60s or 70s....
You're right about the time frame. Interesting burner modification. I look forward to seeing your progress. Be careful with the mixing tube (J...
It looks like someone had problems lighting it then put it away. It is a nice example and would clean up very well. This variation is from the...
Actually, the Optimus can be classed as a Px clone. Optimus released their first lamps in 1930 as almost direct copies of the current Px lamps....
That is quite true. For the burner you can look specifically at the 1001 and 1015 models.
Hi Steve That's a nice find you have made but it will need a good service. The most important thing to have when working on these is patience....
By the looks of your lamp, you will not need to use steel wool. If you use steel wool, it should be 0000 grade.
There are a few differences between the variations. Here is a list of the changes made for your version. 1. Top cap has a different shape. 2....
Unfortunately I don't know much more than that. All I know is that these lamps appeared in military surplus in Denmark quite a number of years...
Very nice lantern you have there. This looks like the ones that came from the Danish military. They were converted from existing 1020s which is...
Separate names with a comma.
