Thanks !! I have one I am selling & I have 2 old Cowls . I Purchased it without the burner But Purchased 2... With Slots & with Holes. now I know...
There seem to be 2 different Cowls for the Bialaddin T-10. Which is the Older one ?? The one with the Holes or Slots on the Cowl ?? Anyone who...
Just an opinion But the military M320's with the protective ring on the Frame and reflector on bottom is a good rugged model lantern. it is easy...
The One with the Removable Pick-Up Pipe were used a lot on the 315 models. If the knob were present and Red it would be easier to identify. just...
Help needed. I hope I have the right name or nomenclature for the Part. I am looking for a Collar like on the Vapalux M-1 or Bialaddin 305. The...
Hi, I am looking for someone who sells Glass Globes for Tilley Table lamps. Dose anyone have a name of someone who has a good selection for TL-14....
I, like us all have a lot of good hoods but they have burned spots or Chips. Dose anyone know of someone who re-enamels. Also will power coating...
to All, First Yes I cleaned it properly. I think than it is getting to much fuel! I will order the new jet and see what happens. I can't stress...
All, O.K. I cleaned and reassembled the 1200. 12MM Gap with mixing tube new Jet, needle, cleaned out tank & filtered K-1 Kero. my first Pre-Heat...
All, Thanks I have the 1200 stripped down to the bone. I'll definitely check the distance between the jet & mixing tube "12MM". I'll let you know...
Thanks All, All good stuff. Lets say I do all that and I still get just Flames and no Glow. Than What? I own many )Optimus, Tilley Aida's...
All, I use K-1 Kero & filter funnel. The vaporizer was soaked in White Vinegar 24Hrs than Brushed out. I start the Slow way with 2 fills of Spirit...
Michael, I tried to 1- open valve all the way screw up&down 2- valve closed screw vertical. 3- 45* angle. Same large flame no light. Can you come...
Need help with my Optimus 1200. The Problem: Mantle just burns with a large flame no light just flames. What I Tried: different mantles( optimus,...
My Tilley is giving me a hard time. I replaced all washers, put on a 164X mantel and all I get is a dull yellow flame. The flame surrounds the...
Thanks, I did the soapy water test and found a leak around the pump. I ordered a set of new gaskets and will replace all of them just to be safe....
Having problems with my Tilley 246B It lights then goes out. Can someone give me operating instructions. I don't pump it until it is pre-heated up...
What I do If I think the quality is iffy ( not so good) I add into my Aida a cap full of Fuel injector cleaner, or Dry Gas. the Dry Gas will rid...
I was told that I could leave the fuel air pick up tube alone because once it's pre heated enough you open the valve all the way at once. am I wrong??
Looking to convert a 1958 Coleman 242C to Kero. What parts will I need? PeterD.
Separate names with a comma.
