:thumbup::thumbup:
There goes a membrane into the treaded cup, e.g. https://www.thomann.de/gb/thomann_kazoo_spare_diaphragm.htm Regards, Steven
Jörg, very nice! ... i think i should visit you some day ... and take some lighting stuff with me and also two bottles of beer to get open ;-)...
> cost a lot more than simply buying a new upper vapouriser. The H202 ist a 250 cp Lamp. This vapourisers are not more on stock as a new Petromax...
No, in my opinion leaking is a problem of the material (stainless steel), as i described about the dicussion in the german forum in post #9. Or...
Okay, probably i explained the experience i had not clear enough. I believe, that the original tilley vap works in this way without leaking. I had...
I used the sealant once and made an unfortunally experience: The sealant expanded under the heat while running the lamp and the tube of stainless...
The size of the tread is M7 x 1 mm. I had already some experience with this vaporizers: Using the Stainless-Steel Tube with the brass nozzle, the...
Very nice and interesting lantern! Thanks for sharing! Steven
That circle cutter looks very usefull! I don't knew, that they are available for such a reasonable price. So then: i ordered one just now to be...
I never did such a thing, but maybe it could work in this way(?): stick the seal on a flat piece of wood with a double sided tape. Move the wood...
... ah, and also you can do some comparison with shown lanterns in the Reference Galleries & Libraries: Lanterns
Depends much on the era of the lantern. Are there some Numbers stamped ore scratched on the bottom? It will be helpful, if you show some pictures...
On this page (scroll down) is some visual information about the marks: https://www.hasag.info/hasag/logo.html
THe only thing i know: "Jenatherm" ist a trade-mark from the former "German Democratic Republic" ("GDR", "East Germany"). Afaik another mark...
Here is a parts list attached, so you can imagine how to disassemble the preheater. There ist one Hole in the middle of part 221 you should clean...
Hello @Paul R , the screw (and the inner blade of this screw) is constructed to adjust the flow of the mix for best result of brightness of the...
Meanwhile i checked the two outer holes at some of my spares of the main body (Part 224): it is easily possible to insert an 500 cp needle. So...
Petromax, Aida und Standard Maßtabelle - hytta.de Ah, okay. Maybe there is a mistake at this page? :-( I found another one, that says the diameter...
There is a technical Information, that says the two outer holes have a diameter of only 0.17 ("Bohrung Anschlußkörper für Luft"): Petromax, Aida...
Separate names with a comma.
