Tilley KL80 ?

Discussion in 'Pressure Lamp Discussion Forum' started by D_Vernon, Sep 1, 2025.

  1. D_Vernon

    D_Vernon United States Subscriber

    Offline
    Joined:
    Mar 30, 2025
    Messages:
    85
    Location:
    Florida
    KL80 ? Can someone tell me how the globe comes off ?
     

    Attached Files:

  2. JEFF JOHNSON

    JEFF JOHNSON United Kingdom Subscriber

    Offline
    Joined:
    Nov 28, 2010
    Messages:
    16,114
    Location:
    Shetland Islands UK..
    That lamp is only called a KL-80 if it's in it's hanger and the link below shows the relevant gallery page, without it's hanger it's an ML-93.

    The top half of your gallery is missing and the globe is held in place by the gallery bolts which go through the holes in the flat springs which are fitted into the slots on the outside of the gallery.

    To remove the globe, remove the gallery with the globe attached and while holding the globe pull back one of the bolts and it should then be possible for the globe to separate from the gallery, sometimes it can be a fiddly procedure so patience is required.

    Harp Lamps (KL)
     
  3. D_Vernon

    D_Vernon United States Subscriber

    Offline
    Joined:
    Mar 30, 2025
    Messages:
    85
    Location:
    Florida
    .
     

    Attached Files:

  4. JEFF JOHNSON

    JEFF JOHNSON United Kingdom Subscriber

    Offline
    Joined:
    Nov 28, 2010
    Messages:
    16,114
    Location:
    Shetland Islands UK..
    Now it's a KL-80, but the heat deflector is missing.
     
  5. D_Vernon

    D_Vernon United States Subscriber

    Offline
    Joined:
    Mar 30, 2025
    Messages:
    85
    Location:
    Florida
    It's not mine , was asking for a friend not on here , the heat deflector would be something similar to a smoke bell on a wick lamp
     
  6. JEFF JOHNSON

    JEFF JOHNSON United Kingdom Subscriber

    Offline
    Joined:
    Nov 28, 2010
    Messages:
    16,114
    Location:
    Shetland Islands UK..

Share This Page