Hello, a collector from Poland contacted me (hello Ryszard!) asking if I would like to exchange a PX 834 for 2 pieces of Graetzin 915. Since I had...
Dobrý den, ano, "knaggenglas" tam je.[IMG] „Knaggenglas“ is here.
Hello, I got my dream lamp Graetzin 915. I would like to use it occasionally to light the inside of my small lamp museum. I disassembled the lamp,...
[ATTACH][ATTACH] First test with a regular mantle tied tightly to the ceramic nozzle. Conny, what type of mantle are you using? Is there a gap...
Hello Conny, I managed to buy a MUNDUS II lamp in the additional nickel - plated version with . The lamp is complete, has a porcelain nozzle. The...
Thank you for the translation :content:
Hello. A week ago I bought a Hasag Polar No.5 lamp from Croatia. I finally took it all apart and cleaned it. Finally I discovered the beautiful...
[ATTACH] [ATTACH] [ATTACH] [ATTACH] Hello, I managed to buy a Lamp Wiktorin on ebay. Unfortunately, it is not in complete condition - the burner...
Hello, I managed to get a lamp Hasag Polar No. 0A from the 1930s, made in Germany. Without pump, brightness 300 c.p. The lamp was only cleaned,...
Hello, yesterday I received this glass for a petromax kerosene lamp with dimensions of 100x74 mm and I would like to know which type it belongs...
I know, but the lamp does not have a Petromax label or inscription. Here are more photos.[ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH]
Hello, I will be buying 2 lamps from India - the first is a Petromax 200 CP (looks like an 834) but it is a different shape, the fuel pipe from...
Simple answer - because the ordinary Petromax nozzle does not have a cleaning cone on the outside + it cannot be bought here in the Czech...
[ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] Hello, many thanks to everyone who gave me advice! Today it worked and one of my...
I didn't know the lamps didn't work without the ring. Of course, I have rings for both lamps. Where can I buy a 250CP porcelain nozzle that will...
Both of my petromax 834 lamps have original parts and nothing is missing, no part has been repaired. Only the nozzles were corroded and full of...
Thank you all for the advice, I will try to support the "J" pipe so that there is more air in the mixture and maybe it will work. I will inform...
I preheated the carburetor using a propane butane burner - preheating with alcohol is the same problem.. The tube is longer due to the use of a...
Then the problem will not be in the ceramic nozzle. I made a reduction on the lathe to a large burner and the lamp still makes flames. Most likely...
Separate names with a comma.
