Well, at least there's two of us around!
Did anyone local manage to go? I only live 2 miles away but was otherwise occupied!
Did anyone get along to it? I only live 2 miles away but was distracted....
Thanks, Tony, that sorted it! I still needed the draught shield but, otherwise, it worked just as you said. Must look at those petromax primers.
I'll give that a go tomorrow, Tony. Thanks again for your help/advice.
Thanks, again, Tony! I'll give that method a try.
And, on a further note, I've also sorted the lighting up routine. A good burn, with the windshield and meths torch; open tap and pump: lots of...
Thanks for the comments guys! Yes it was good to finally get it sorted. This, of course, leads to a further question: Why was the height changed...
Thanks, Ellie, don't know if it was you but, I think I'll have to have another look at them.....
Oh! Frabjous day! Halloo, Hallay - he chortled in his joy (Jabberwocky). I finally sorted my R1! The problem turned out to be connected to the...
Thank you, David but, although I certainly agree it's a "draught" shield, it also confines the heat to around the burner assy., etc., as well,...
Thsnks, Neil. I'm going to make up a temporary draught shield from a 500ml drinks can, which, appears to be a good approximation to the original....
Lovely lamp, Tony. Glad it safely arrived. Can't wait to see it in action.
Thanks Graham and, Tony. I'll see what I can track down for a temporary replacement, and Tony, thanks for the PM. I've replied to you. Watch out...
Especially with the state of the £ at the moment, virtually £1 = 1Euro. Ouch!
Somewhere on here, I'm sure there will be a post detailing the dimensions of a Tilley draught shield but, currently, am unable to find the post....
Thanks Neil, thought that may be the answer, although I don't remember my Grandfather, back in the '50's having a problem. But, then, he'd...
Sometime ago, on this site, I read some rather uncomplimentary remarks about Juliands. Have they improved then? I've been avoiding them, perhaps...
Hi Graham and, Tony. "Falling apart" problem appears to have been resolved! I found that, when re-assembling the inner tube (inside the ceramic...
Thank you Graham, I will give that a whirl and report back.
Separate names with a comma.