Hi SulphurTX, Did you check that you have the correct gap between the J tube and the nipple? Should be 14.2mm. Also make sure that you have no...
Hi Jeremy, This link is very informative informative and delves deeper into schrader valves Observations on valve assemblies for 400B, 442, 533...
Thanks Jono and Jeff. Reinhard i could not find any markings on the bottom but i have not cleaned up the lantern yet
As received. Replaced NRV pip and pump leather. Not fettled yet. My score of the year. [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH]...
Thank you Andrew
Good Morning, Busy with a Hipolito 350. When i took the lantern i noted the disgusting burn marks around the area of the lighting hole. I have...
@ROBBO55 Thank you Matin
Thank you to everyone for the replies and information. The shade holder might belong to the 156 or not at all part of these lamps. To make a shade...
Good Morning, @podbros I thiought the bottle top was an attempt to stop paraffin leaking onto the handle that is badly burnt. Initially thought it...
Been after some lamps for a while. First one I found was a well used/abused Coleman 1/61 159X missing all the top hardware. This morning followed...
The more i clean parts i am convinced that this was either kept going by necessity or a parts bin lantern. The pump for instance - use of washers...
Good Morning and thank you @Toby Garner and @MYN As i progress i will photograph individual pieces. I am just pleased that it works and i have...
You might be right about a mix of parts. I have never seen one before - very uncommon over here. It has been worked on as you can see in the photo...
Morning @Kgam1020 Thank you for the reply. The collar has no markings on it. Most of the plating on the collar is off so contemplating maybe...
Morning, Busy with this 228. Trying to determine model and at this stage I assume late C. Steel air tube Screw in pump Black control know fixed...
Thank you eiremax.
Compliments of the season to all, Amongst others i acquired the above. It is missing the control knob and the pump handle. The excenter is also...
Well she cleaned up better than i thought. Had to silbraze the air intake tubes to the bottom plate.Got some final cleaning up to do. She runs ok...
Good day Busy with the above. Pictures as I was stripping and cleaning. Someone in their infinite wisdom used a hacksaw to saw off the peened end...
Thank you Martin and Jeff
Separate names with a comma.
