No issue now, discovered a couple small stress cracks today after checking to see why there was a pressure loss. Duane
Turns out the Coleman QL 327 fount I found has a couple small steess cracks, looked at my lamps and took apart a AGM lamp tonight tried unscrewing...
Received my repaired valve back today, found a fount that it would take the valve as the original fount was very stress cracked. Lantern was a...
I accumulate a few stove and lamp, lantern parts over the years and occasionally get to use them on new acquisitions. I picked up six lanterns...
"and" Could not make out much more by brushing the areas where numbers are/should be. Duane
This mostly has later features except it does have a knob/valve wheel that is sorta a bloated square hole, the valve stem has been partially...
Correct on date switching and some faintly stamped, only asking if possible to remove coating, thank you. This one has the cotter pins which were...
That stuff they coat nickel Coleman fount bottoms, has anyone tried removing it in area where dating numbers should be? I have a recent 228B find...
Being single really helps with kitchen fettling, oven paint curing and the like inside. :) Duane
I've unsoldered a few pump tubes on my Swedish stoves before a year ago being able to have someone make a NRV tool that will lock onto the pump...
Yes, paint shined up nicely. Duane
@Konabill, gave up thinking this was a "K", believe it to be just a early 247. Funny, had a aftermarket wheel made for the "K" I do have and this...
I thought it still had some smell, just too expensive to use regularly. Duane
No effect on me, I don't do those. Duane
I find it's really hard to find parts for AGM, PW etc. except another donor lantern or buy one complete already. OCP has a few items like the...
Nice, I have both vents. Cap looks Coleman, would have to look at my lanterns. Duane PS: Sorry, was thinking fuel cap.
Can check in with Coleman Collectors Forum, mine may still have the genny that came with it. I did a kero conversion with a 220K I had, using...
Coleman fuel/camp fuel etc. I'm thinking torch light(preheat genny) with a torch or couple matches, be prepared for flare up if valve opened more...
Similar valves are on 3606 and 3608, but other valves I think have similar design with the piece 180 degrees opposite the shaft. Duane
What model AGM lantern valves look like this one from a model 100? Poor pics, I broke off the part that is 180 degrees opposite the valve shaft....
Separate names with a comma.
