Thanks! They're made in China, sorry. They're listed as quartz glass and confirmed not borosilicate. I had a little accident and started...
I wanted some custom glass made for my Primus 1001 / 1050 lamps so I went through Alibaba and managed to get 4 for $28 each with $52 delivery to...
I think Mike said as much when I asked him for the replacements. Thanks for confirming John. The replacement NRV's are a pretty penny though!...
Light up video as promised. I had fitted a NOS Coleman R55 generator from Base Camp. The font had about 40 pre-pumps before lighting. It...
Got it all back together again. Had to wait for some Weller 60/40 solder to arrive as I only had silver lead free stuff. The end cap needed some...
Yes, Mike was aware of the size difference and he sent me the correct ones. I've just tried it and it fits.
Thank you for all the advice. This NRV removal business is more an art than a science! No joy with removing it via pliers so desoldered the end...
Thank you for all. I will do my best to show the lighting and running once I replace the NRV. This was required as I could hear the gas escaping...
I'd properly rounded off the head on the NRV in the pump tube so no recourse but to remove the tube using a blow torch. On advice I'd filled the...
Hello, picked this up a couple of weeks ago from fleabay in the UK. It has a 1051 burner / vapourising tube that all seems to be a piece. The...
Hello, I received this lantern a month and a half ago. It was quite rusty: [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] It had the...
Thanks for the encouragement everyone. I decided to post my efforts as I've not seen much online about replacing a mica pane and thought I'd give...
Hello, I got an old mica globe from a 1001 lamp but one of the panes were broken. I decided to try and replace it myself. [ATTACH] [ATTACH]...
Tony - thank you very much for the offer. I fear a replacement would suffer a similar fate to the original part unless I can troubleshoot why the...
Thank you for all the suggestions. Taking the chimney apart, I could see that the cracks were caused by pushing onto the top of the vapourising...
The cracks are quite small. Unfortunately I don't have a blow torch or high content silver solder, just a soldering iron and fairly low temp...
I just received a Radius 119 today and unfortunately it has a cracked inner chimney which the seller neglected to mention. I'm guessing this...
Yes the hood is clearly a replacement as is the new glass. I'm not complaining as it is half to one third cheaper than the ones with a correct...
Hello, I picked one of these up as my first lamp as I'm sure many here have. It had clearly not been used in some time and had quite a lot of...
Separate names with a comma.
