Yes, in the Netherlands. It was at a lamp meeting/ lampentreffen. I bought it from a German collector.
This Aïda was purchased about two years ago. It was a little bit rough. The rapid wasn't working, and the original jet was missing. The rapid...
Here's my Radius 115. Nothing special to do, only a good cleanig and replaced all the old seals[ATTACH]
Here is my Optimus 826. It is not in the best condition, and the nickel plating is very thin. Nevertheless a rare lamp that [ATTACH] [ATTACH]...
Here's my latest find, a Thermidor. With the original globe. The spirit cub is missing, and I had to start the lamp with an Tilley pre- heater....
I finished my Lilor today. Here are some pictures of the lamp in action [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH]...
Found this Lilor on a fleemarket. Replaced the graphite washers, and cleaning all the parts. The pressure gauge looks different if I compare it...
Forgot some pictures
I recently found this lantern. There is no brand name on it. Is it a Thermidor 303? The stamping on the bottom, could this be a date? There's...
This is a Danus lantern from Spain. The lantern is exactly the same as a Standard 2045. Most of the parts are made of brass. It's running on...
I'm still working on my Petromax 836. There is a steel big jet on this lamp. It's not working fine, I think the hole is worn out. I'll try to make...
The original 500cp ceramic burnerhead was not tight enough fitting. The missing chamber is in very good condition. That's the reason I decided to...
That's the same way I did. A friend made the brass burnerhead. The gauze was made myself of stainles steel. I bend it a little. When cupped enough...
Yes, that's correct Tony. The tank was made of steel. The former owner did some repairs on the paint, and at some places there was no paint but...
Found this Petromax some time ago. It needs a very good cleaning, and I painted the fueltank. The burnerhead was missing. A very nice friend made...
Here are some pictures of the parts that I made. The burner tube is 15mm diameter brass tube, with a petromax 500cp burnerhead and 500cp ceramic...
The Luxinvert is working. The complete burner and glass were missing. These parts are not available and not possible to find. I made a burner...
I got the Lux invert working. Original parts are not available, or possible to find. So I made a burner myself, and bougt a big glass. A glass...
Many thanks for the replies. I think I have to make a burner myself, and try to find a glass
Thanks for the information, it's much appreciated. Now I hope that there is someone who also has such a lamp and is complete, so that I can get a...
Separate names with a comma.
