I have got no other choice than to run the cleanable Taiwan/Korean ones on my 1940s 300X and Korean E41s.. All came with original single use...
Cobble up the 'beyond repair' parts together to become a lamp. poke a hole in the tank (so nobody will wanna fill it up with fuel again)… sell...
There is another shop at the end of Chinatown with some lamps, from granny's wall lamp to Aladdins to pressure lanterns.. Much like this shop,...
Here are some closeups Pmax/Santrax vs no name vs L6 [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] There is...
These modern Pmax made lanterns… I never seen any other clones for 150cp to really compare with. I will get back with maybe some photos of a Pmax...
Por15 set costs SGD $100 ish here.. Recently I've gotten Red-Kote for about $40 for the 200ml bottle. Either way they are costly. But I am...
I am really confident this lamp was made by the same company, albeit with some minor changes. Perhaps to their original design? or cost cutting?...
@george Its all brass :mrgreen: The only steel portion is the shade O:)
@MYN Brass base metal, exactly like the modern Santrax and Pmax. You may click on the links above.
A lower cost option, also on taobao. Needs a taobao local taobao agent for purchase. 珍藏版煤油老汽灯 铁锚上海原厂生产 绝版收藏款-淘宝网
Correction, not Aliex... Will need taobao agent in your area to get them. Brass Chrome 150CP Brass Chrome and Lantern Pole 150CP Chrome 150CP...
My parcel from the East arrived today. It is unclear to me if this is a new or an NOS unbranded lantern from Aliex… [ATTACH] [ATTACH] [ATTACH]...
I don't see myself as a woodworker @MYN , more of somebody who repairs Erhus as a hobby. I had built one box for a 150cp with that paulownia wood...
The most useful saw i do not own, a table saw.. A family of 1900s Stanley planes. [ATTACH] [ATTACH] However, installing the flush handle, just...
@WimVe Precisely! I carry Vapaluxs in there too! They fit most lamps. Im too lazy to make them from scratch…
I've had these boxes from petromax for ages but could never understand the top handles. See what i mean… I have here installed a flush handle...
I don't think i am game enough for the 0.13mm hole drilling nor is my lathe capable of that.. Would need some watchmakers' for those tiny jets i...
Not to mention the dexterity to mount it on the lathe for final touch ups. On a 2 inch 4-jaw chuck :shock: I guess peening is an easier approach...
@Reese Williams Actually i am facing the need to get separate jets to fit on a R55 generator. R55 can be cleaned out and rebuilt, but different...
@presscall :shock: Bernzomatic seems like poking a 3mm hole with an elephant gun... i managed to obliterate a piece of sheet brass while brazing...
Separate names with a comma.
